Kayak rigging is something that we all do and love. Let’s be honest, nothing gets a kayak angler more excited when they get new rod holders, camera mounts, and anchor trolleys so they can do some kayak rigging. YakAttack, Scotty, and Ram Mount all have some new goodies available to get your angler truly excited and doing some kayak rigging before the wrapping paper has hit the floor.
YakAttack has long been one of the leaders in the kayak rigging and accessory field. They pride themselves on innovative products that are made in the USA and have a strong following amongst kayak anglers across the globe. This year we were introduced to the RotoGrip Paddle Holder, LeverLoc Anchor Trolley, and the Boomstick Camera Mount. All of these items make kayak rigging much more fun, and makes us better anglers on the water.
RotoGrip Paddle Holder
Super low profile, the Rotogrip Paddle Holder grips the paddle shaft between two soft rollers, securing your paddle quietly and with just the right amount of tension.
- Construction: UV Stabilized Nylon
- Included: Sold in Single Pack, GearTrac not included
- MSRP: $14.00
LeverLoc Anchor Trolley
The first anchor trolley designed specifically for the job, the YakAttack LeverLoc Anchor Trolley features a LeverLoc line clamp, which locks your trolley line in place with a simple “flip of a switch” motion. Keeping the trolley lines in line is the PadHook, a simple but clever design that combines the functionality of both a pad-eye and a hook, keeping even the tightest trolley lines in place on the side of the kayak, not over your gunwhale. When not in use, the easy-knot trolley ring snaps into the base of the LeverLoc, quietly secured until deployed. Includes 35’ of USA made 550 paracord with a highly reflective tracer.
- Construction: UV Stabalized Components
- Included: Harken Pulleys, 2 Pad Hooks, Locking Line Clamp, Anchor Ring
- MSRP: $35.00
Boomstick Camera Mount
The Boomstick Camera Mount is a 43” long, GoPro® ready, camera pole designed to fit RAM Plunger Bases. The BoomStick’s length will allow for higher and wider camera angles on a rigid and secure platform.
- Dims: 43″ (total length) X 3″ X 2″
- Weight: ~2 lbs
- Construction: UV and Marine Resistant Polymer
- Included: GoPro Camera Pole, Pivoting Head, Post and Spline Ready
- MSRP: $65.00
Scotty Fishing Products has been around since 1952, and are still making high quality fishing rod holders, camera mounts, and so much more. New to Scotty is their new Transducer Arm Mount. Also, we’ve added the Portable Camera Mount, as we’re all about capturing those epic catches on video.
Transducer Arm Mount
Kayak/SUP Transducer Mounting Arm made of high strength composite material that will give you years of service – without any corrosion problems. Also included is the 415 Slip Discs that offer micro adjustments when needed. The Scotty Transducer mount telescopes from a compact 11.5 inches to 18 inches when fully extended and swivel 360 degrees.
Portable Camera Mount
The Scotty Portable Camera Mount is fully twistable, turnable, rotatable, and best of all, instantly portable. Locks down a standard camera or sports cam without needing a special adaptor. Fits into ALL Scotty post mount systems which means we have you covered no matter what you want to mount it to!
Whether you are on a lake, flatwater stream, whitewater, inlet or ocean, kayaking is all about adaptability. At RAM®, we create a complete line of rust resistant mounting solutions for kayaks which allow you to mount items where you need them the most. RAM Mounting systems offer the widest selection of kayak fishing accessories to adapt to a wide range of fishing scenarios.
Stack-N-Stow Bait Board
Whether you’re looking for an easy way to cut bait, or store your tools close by the Stack-N-Stow bait board offers the ability to do multiple things while on the water. Need to cut up mullet for chunk bait, store your tools handy, carry extra gear? Check out the bait board from Ram Mounts.
- Magnetic surface for tools
- Customized mounting options
- Accessorize with phone, camera, drink cup mounts
- Mounting options for boat and kayak
- High strength materials ensure product longevity
- Integrated features for hanging tools
- MSRP: $44.00
Ram Camera Mount
The Ram Camera Mount consists of a 2.5″ diameter round base that contain the universal AMPS hole pattern, SHORT double socket arm and 1″ ball, connected to a round plate with 1/4″-20 camera thread. The male 1/4″-20 threaded steel stud will connect to any standard female thread found on camcorders, digital cameras and POV cameras. The mount is designed with a RAM 1″ diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles.
- MSRP: $26.98
When you’re shopping for that special kayak angler on your Christmas list, make sure to add these great accessories for kayak rigging. They’ll definitely be extremely excited!